User guide

82 10 91: AM P1- M AD I e U se r G u ide
© 2013 Wohl er Tec hn ologi e s , In c . Al l r ig h ts re se rved.
17
Ch apt er 2 Operation
Adju s ti ng th e S p e a ke r A u dio T o n e Co n tr o l s
Quick: Used when it is more likely necessary to mute or unmute
channels quickly, with a one-touch operation.
Pressing the audio Channel Select button in Audio Menu 2 selects
between the three possible modes of operation for the Channel Select
buttons on the Main Screen.
1. To adjust these controls, hold the Channel Volume knob for at
least three seconds until Audio Menu 1 displays.
2. Press the Next button to proceed to Audio Menu 2.
3. Press the Channel Volume knob for at least three seconds to
return to the Main Screen.
You can adjust the volume of each channel individually. On the Main
Screen press the Channel Select button adjacent to the channel you
want to change to highlight it in yellow. Then turn the yellow Channel
Volume knob. The green line under the meters for these channels will
lengthen or shorten according to the Channel Volume knob position,
indicating how much you are changing the volume.
Adjusting the Speaker Audio Tone
Controls
Depending on the listening environment, you may need to adjust the
tone of the audio to improve the sound coming from the speakers. You
can do this with the digital Bass and Treble tone controls as well as
the low cut control provided in Audio Menu 2.
1. To adjust these controls, hold the Channel Volume knob for at
least three seconds until Audio Menu 1 displays.
2. Press the Next button to proceed to Audio Menu 2.