User guide

82 10 91: AM P1- M AD I e U se r G u ide
© 2013 Wohl er Tec hn ologi e s , In c . Al l r ig h ts re se rved.
15
Ch apt er 2 Operation
Us in g an d D e fin in g Pre s et s
Figure 2–2 Preset Selection Menu
Then press the button corresponding to Preset 2 on the screen and the
Preset Action Menu will appear as shown in Figure 2–3 on page 15.
Figure 2–3 Preset Action Menu
Press the Recall button. Now the second eight channels, 9 through 16
will be monitored.
Press the Exit button to return to the Main Screen.
Selecting Any Eight Channels
Pressing the Channel Assignment button lets you quickly assign any
MADI channel to any metering channel position. Press the Channel
Assignment button to display the Channel Assignment Menu as
shown in Figure 2–4 below.
Preset Selection
Preset 5
Default 5
Preset 6
Default 6
Preset 7
Default 7
Preset 1
Master Control
Preset 2
Truck 1
Preset 4
Default 4
Preset 3
Truck 2
Select a Preset
to save or
recall.
To exit without
changing
anything, press
Preset Select
again.
Preset 8
Default 8
Preset Action
Recall this Preset
Save the current config
to this Preset
Recall
Save
Exit with no changes at
all
Exit
Current Config: Default 1
Selected Preset: Default 8 (Preset 8)