User guide

82 10 91: AM P1- M AD I e U se r G u ide

C hap t er 1 Installation

Re a r P a nel

• Select Preset: Presets are complete configurations of monitoring

channels, including individual channel volume levels. Pressing this

button displays the Preset Selection Menu.

• Channel Assign: Pressing this button displays the Channel

Assignment Menu in which you can select the exact eight (of the

64) MADI channels you want to monitor. Note that the channels

you monitor need not be contiguous.

• Channel Volume: After the Channel Select buttons are pressed

to highlight the monitoring channels in yellow, the yellow Channel

Volume adjusts the individual level of each highlighted channel.

Pressing the yellow Channel Volume mutes or unmutes the

yellow highlighted channels, except in Quick Mode, where it simply

ends the channel volume adjustment.

Rear Panel

Figure 1–2 Rear Panel Layout

• Power: The AMP1-MADIe uses a standard IEC power cord for the

100 to 240 VAC ±10%, 50/60 Hz power connection.

• MADI Inputs: (1 Coax, 1 Optical) These two connectors accept

either 56- or 64-channel MADI input signals.

• MADI Outputs: (1 Coax, 1 Optical) These two connectors output

either 56- or 64-channel MADI output signals.

• Ethernet: The Ethernet port can connect to either a LAN or to a PC

to let you customize the AMP1-MADIe configuration. It will also

allow you to copy system configurations from one AMP1-MADIe to

RIGHTLEFT MONO MIX

BALANCED

ANALOG OUT

MADI

IN OUT

100-240 VAC

50/60 Hz

MADI

OUT IN ETHERNET

Power

EthernetMADI I/O 1 and 2

(Inputs and Outputs)

Analog Audio Outputs

(Left, Mono Mix, & Right)