User guide

82 10 1 6: AM Px- E8 Ser ie s U se r G u ide
© 2013 Wohl er Tec hn ologi e s , In c . Al l r ig h ts re se rved.
65
C hap t er 6 Setup Menu
St ar tu p
de-embedded SDI AES signals, but does not affect the reclocked SDI
output in any way.
Figure 6–13 SDI Delay
Step through settings using the Up or Down button, select 140 ms (for
example). To accept, press the Enter button. Press the Esc button to
exit Setup Mode and return to Normal Monitoring Mode.
Startup
The Startup
StartupStartup
Startup entry within the Setup Menu determines the input used
by the unit at power up. When set to Last Used
Last UsedLast Used
Last Used, the unit will power
up the same way that the unit was before power was interrupted. If
instead you want to have the unit start up every time with the same
input selected, repeatedly press the Up/Down buttons until the
desired input is shown in the LCD. Save the selection by pressing the
Enter button. Press the Esc button to exit Setup mode and return to
normal operation.
Surround Gain
To change surround gain, select Srnd Gain
Srnd GainSrnd Gain
Srnd Gain and then press the Enter
button.
Figure 6–14 Erasing a Preset
-Setup-
SDI Delay: 140 ms
-Setup-
Srnd Gain -3dB