User guide

8 21 01 6 : AM P x-E 8 Se ri es Us er Gu i de

Ch apt er 4 Pr e se ts

Wh a t ar e P r e set s?

What are Presets?

The AMP1-E8 is an incredibly flexible tool for monitoring multiple

audio streams. You can configure the entire system to function exactly

the way you want it to for your specific application. You can store a

complete system configuration into a preset. After saving one or more

presets, you can quickly scroll through them with the press of a single

button. The AMPx-E8 allows you to store up to 10 presets (numbered 0

through 9).

Methods of Accessing the Presets

Setup Menu

All presets can be stored, recalled, or erased through the Setup menu.

1. Press Fn+Setup to enter the Setup menu.

2. Use the Up and Down arrow buttons to select Save Preset

Save PresetSave Preset

Save Preset,

Erase Preset

Erase PresetErase Preset

Erase Preset, or Recall Preset

Recall PresetRecall Preset

Recall Preset.

3. Then press the Enter button.

Each of these menu items is described more fully in Chapter 6: Setup

Menu on page 55.

Preset Mode

This mode of operation is intended for situations where a number of

pre-defined unit configurations is all you need. This allows even the

most non-technical person to quickly scan through a list of sources to

monitor, without having to understand the operation of the rest of the

unit, or which source is plugged into which input of this unit.

In Preset mode, the Input button cycles through the defined presets.

With Preset mode enabled, you can recall a preset by pressing only the

Input button to access each stored preset by name, rather than by

signal type.