User guide

8 21 01 6 : AM P x-E 8 Se ri es Us er Gu i de
© 2 01 3 Woh le r Te ch nolo gie s, Inc . All ri g ht s res e r ve d.
38
Ch apt er 3 A ud i o C o n fi g u r a tio n
Sel e cti ng th e I n pu t S ig na l
Figure 3–12 SDI Delay Setting
4. Press either the Up or Down buttons to select the delay in
milliseconds from 10 to 170 for units equipped with a 919300 SDI
De-embedder, or from 10 to 340 for units equipped with a 9193989
SDI De-embedder.
5. Press the Enter button to make your selection and return to the
Setup Menu.
6. Press the Escape button to return to normal operation.
Selecting the Input Signal
While the system is in normal operation, press the Input button to
cycle through each of the five selections. The selection is enabled when
it appears in the LCD screen. (Pressing the Enter button is not
necessary.)
Analog
AES
AES1
AES1AES1
AES1 (Unbalanced)
AES2
AES2AES2
AES2 (Balanced)
SDI (not available in the DA model)
Auto.SDI
Auto.SDIAuto.SDI
Auto.SDI or Auto.SDI2
Auto.SDI2 Auto.SDI2
Auto.SDI2 if no signal is present
SD.SDI
SD.SDISD.SDI
SD.SDI (signal is present and auto-detected)
HD.SDI
HD.SDIHD.SDI
HD.SDI (signal is present and auto-detected)
3G.SDI
3G.SDI3G.SDI
3G.SDI (signal is present and auto-detected)
-Setup-
SDI Delay: 140 ms