User guide

821189: AMP1-16-M User Guide

Chap ter 1 Quick Start

Safety

Safety Symbols

Mounting

The unit is designed to install into a standard 19" rack mounted at ear

level for best high frequency response and visual observation of the

display screen. Please adhere to the following clearances:

Heat Dissipation

The ambient temperature inside the mounting enclosure should not

exceed 40° Celsius (104° Fahrenheit). Adjacent devices can be rack

mounted (or stacked) in proximity to the unit if this temperature is not

exceeded. Otherwise, allow a 1RU (1.75”/44.45mm) space above and

below the unit for air circulation.

Sympathetic Vibration

Sympathetic vibration from other equipment (cables, etc.,) in the rack

may be serious enough to interfere with the unit’s sound quality. The

use of thin card stock and/or felt or foam weather-stripping type

WARNING:

The symbol to the left warns of electric shock hazard inside the unit.

Disconnect the power cord before removing access panels when

installing upgrades. Only qualified service personnel are to operate the

equipment with covers removed, and are to exercise caution to avoid

personal injury.

Clearance Surface

24” Front

3” Rear

2” Sides

1.75” Top and Bottom (if either radiates heat)

0” Top and Bottom (if no heat)

Important:

To reduce noise, the monitor does not have any fans. As a result, the

heat generated by the class D power amplifiers, power supplies, and

other components is vented by slots in the sides and back of the unit.

Therefore, as a safety precaution, you must allow proper ventilation on

these surfaces.