User guide

821189: AMP1-16-M User Guide

Append ix D Upgradi ng th e AM P1- 16 -M Us ing a USB Fl as h D rive

Upgr ading the S oftwa re Us ing a USB Flas h Dr ive

AMP1-16-M. The next screen to appear will describe what to

expect in the installation process

B. Alternatively, you can press the

Replace Software

Unconditionally

button to install the software contained in

the flash drive into the AMP1-16-M, even if it the same

version already is installed and even if the flash drive version

is a lower version than what is already installed. The next

screen to appear will describe what to expect in the

installation process.

After you have selected a software installation option, the system will

display the Software Update screen shown in Figure D-5 below.

Figure D–5 Flash Drive Software Update Screen

Pressing Start the Update button will start the installation process,

which will automatically continue until its conclusion. Instructions are

provided on this screen to explain the process.

Alternatively, you may press the Cancel/Quit button to return to the

Flash Drive Software Update menu and not perform the software

update.

When the software is finished installing, the AMP1-16-M will restart

and the Main Screen will display the message in Figure D-6 below.

Cancel /Quit

The software update is

ready to start. Please

read the following first:

Please wait for this!

To exit without

installing software ,

press Cancel /Quit

Start the Update

Press Start the Update

when ready

This software installation may take

1 - 5 minutes . Do not remove power or

the USB device . The screens may go

blank and the unit may restart several

times. A message will be displayed

when the installation is complete .