User guide

821189: AMP1-16-M User Guide

Append ix D Upgradi ng th e AM P1- 16 -M Us ing a USB Fl as h D rive

Upgr ading the S oftwa re Us ing a USB Flas h Dr ive

Upgrading the Software Using a USB

Flash Drive

1. 1. Insert the USB flash drive into the unit.

2. 2. If the USB flash drive has firmware files on it, the green

Update

button will appear on the right screen. If the firmware files

are missing, this button will not appear. See Figure D-1 below.

Figure D–1 Flash Drive Connected Screen

3. Press Update Menu.

4. All the firmware files on the USB drive will be read and validated.

This will take a few minutes, and progress screens are presented.

Once the validation is finished the following menu appears:

Figure D–2 Flash Drive Software Update Screen

Flash Drive Connected

Get System Config . from

Flash Drive

Save System Config . to

Flash Drive

To exit this menu ,

remove the USB device

Get

Save

Update the unit software

from the flash drive .

Update

Flash Drive Software Update

Update Software

as Needed

Cancel / Quit

To exit without installing

software,

press Cancel /Quit

View Versions

Update only the outdated

parts of the software .

(Recommended )

Replace Software

Unconditionally

Update the software

regardless of version .

(Use cautiously )

The installed software

needs an update.