User guide

821189: AMP1-16-M User Guide
© 2013 Wohler Technologies, I n c . A l l r ights reserve d .
55
Appe nd i x B Using a Direct Connection
In tr oduct ion
APPENDIX B
Using a Direct Connection
Introduction
Overview
A direct connection should only be used when a LAN (local area
network) is not available. A direct connection to any unit can be
difficult if you're not familiar with setting static IP addresses.
Fortunately, this unit has a DHCP server embedded in it, which will
make a direct connection much easier. All of these instructions may not
be needed in your particular situation, but following them ensures
success.
Topic
Im por ta nt:
If you have not yet installed the AMP1-16-M Manager setup software
into your PC you must do that first. Please see the download and
installation instructions in Appendix A before continuing.
Topic Page
Using a Direct Connection 56