User guide

821189: AMP1-16-M User Guide

Ch apter 4 Internal Menu System

Ve rs ion a nd Ethe rn et Me nu

•

Addr Mode

: Pressing this button selects between

DHCP

and

Static

address modes.

Note:

Switching to a static IP will

automatically cancel the direct connection selection.

•

Connect

: Pressing this button selects between a

LAN

connection

and a

Direct

connection.

Note:

Choosing the direct connection

will automatically put the unit into DHCP mode.

•

Finished

: Pressing this button closes this menu and returns to the

Monitoring Screen

Im por ta nt:

If the IP information has been changed, the unit will have to restart. A

warning diamond will display, and you will need to confirm or cancel

before proceeding.

If the information in the IP fields is not correct, the changes made in

the IP fields will be ignored. The IP address is valid if the screen reads

“DHCP Mode Enabled” or “Static IP Mode Enabled.”

Im por ta nt:

This enables a single-address DHCP server. Thus, when a computer is

connected directly, both the unit and the host computer will be

assigned a DHCP address, and they will be able to communicate.

However, this setting will cause problems with some LANs. If this unit

will be connected to a LAN, leave this setting in the

Connect: LAN

setting which disables the internal DHCP server.