User guide

821189: AMP1-16-M User Guide
© 2014 Wohler Technologies, I n c . A l l r ights reserve d .
37
Ch apter 4 Internal Menu System
Me te r Seg me nt Me nu
Meter Segment Menu
On the Meter Segment Menu , you can customize your level meter
segments thresholds and colors.
Figure 4–7 Meter Segment Menu
• Upper Segment : Pressing this button and then rotating the Trim
knob adjusts the division between the upper and middle segments.
You can adjust the color boundary in 1 dBr increments, and it has
the same range as the bottom and top limits of the meter.
• Middle Segment : Pressing this button and then rotating the Trim
knob adjusts the division between the middle and lower segments.
You can adjust the color boundary in 1 dBr increments, and it has
the same range as the bottom and top limits of the meter.
• Default : Pressing this button changes the settings on this menu
and on the Meter Type and Reference Menu back to the factory
settings for the chosen scale type.
• Upper, Middle, and Lower Color : Pressing this button and then
rotating the Trim knob cycles the upper, middle, or lower color of
the displayed sample level meter color through a wide variety of
colors.
Meter Segment Menu
Set Default
23
19
13
Upper Color
Middle Color
Lower Color
0
-60
-50
-40
-30
-10
-20
-20 dBFS
-30 dBFS
Upper
Segment
Middle
Segment
NextBack
Press a Segment or Color
button and then turn the
Trim control to adjust.
To quickly exit these Menus, press Trim for 3 seconds