User guide

821189: AMP1-16-M User Guide
© 2014 Wohler Technologie s , In c . A l l rights reserve d .
30
Chap ter 4 In te rnal Me nu Sy stem
Tr im Menu
• Fixed : Pressing this button fixes the line level of the analog outputs
as they are in the SDI signal, where -20 dBFS = +4 dBu (± 1 dB). This
is the default setting.
• Volume/Balance : Pressing this button enables the Volume and
Balance controls to affect the analog outputs. This setting can be
convenient to use when monitoring is always done through the
analog outputs with external amplifiers and speakers.
• Trim : Pressing this button enables the Trim controls to affect the
analog outputs.
Trim Menu
The Trim Menu allows you to select customized settings for the levels
of each channel or input pair.
Figure 4–3 Trim Menu
1. Enabled/Disabled : Pressing this button toggles the Trim
feature on (enabled) and off (disabled). When disabled, pressing
the Trim control will not enter the Trim Screen . Also, the Trim
mode and Dual mode buttons are dark, but not disabled.
Note:
Note, if the Analog Output is set to controlled and the
Speaker Mute is set to Always , then plugging in the
headphones will cause the analog outputs to mute.
Trim Menu
Enabled
Enabled /
Disabled
Dual Mode
NextBack
Trim Function
Trim Mode
To quickly exit these Menus, press Trim for 3 seconds
Affects Spkrs & Headphones
in Monitor & Trim Screens
Affects Spkrs & Headphones
in Trim Screen Only
Reset Trim
Levels
Quickly Reset all Trim Levels
for both SDI 1 and SDI 2 to 0
Note:
When disabled, the Trim Controlled option on the
Audio Menu is disabled.