User guide

821189: AMP1-16-M User Guide
© 2014 Wohler Technologie s , In c . A l l rights reserve d .
26
Chap ter 3 AM P1 -16 -M G rap hi ca l U ser Int er fa ce (G UI) Man ager
Th e USB Tab
hard drive. When the Save As dialog appears, browse to the folder
where you wish to save the file, and then click Save .
• PC Setup Files—Open : In the FPC Setup Files area, click Open
to open a file from the PC’s hard drive. The Open dialog will appear
where you can browse to the desired configuration file. When you
press Open , this will become the current configuration displayed in
the Manager.
Programming Files— This pane relates to preparing a flash drive to
be used to update the software in AMP1-16-M units.
• Check for Updates: Clicking on this button checks the Wohler
website for updated software, and if it exists, it downloads it.
• Create Update on Flash Drive: Whether a new update was available
on the Wohler website or not, this button can be used to create a
software update on the attached USB flash drive. After this operation is
performed, AMP1-16-M units will recognize that an update is available
on the flash drive and will offer to update themselves from it.
• Note: Units with versions prior to 4.00 will not perform a software
update from a USB stick. This must be done using the Ethernet port.
Note:
This button has the exact same functionality as the
Save button on the Ethernet tab. It is repeated here
for your convenience.
Note:
This button has the exact same functionality as the
Open button on the Ethernet tab. It is repeated here
for your convenience.