User guide

821189: AMP1-16-M User Guide
© 2014 Wohler Technologie s , In c . A l l rights reserve d .
22
Chap ter 3 AM P1 -16 -M G rap hi ca l U ser Int er fa ce (G UI) Man ager
Th e Et her ne t Tab
13. Audio Pair Select and Mono Channel Select: These two options
control the method of channel selection on the main screen of the
unit.
• Mono Channel Select – When set to Disable, both channels of a
pair are quickly selected and deselected by repeated presses of a
Channel Pair Select button. When set to Enable, multiple
presses of a Channel Pair Select button will select or deselect
one or both channels of the pair, allowing you to select
individual channels. For example, using Pair Select 3/4:
o First press selects both channels for listening.
o Second press leaves only channel 3 selected.
o Third press leaves only channel 4 selected.
o Fourth press leaves both channels 3 and 4 deselected.
• Audio Pair Select – When set to Single, only one pair may be
selected at any given time. Selecting any given pair will first
deselect any other pairs. When set to Multiple, any number of pairs
may be selected at one time for listening.
The Ethernet Tab
1. Click the Ethernet tab.
Figure 3–3 AMP1-16-M Manager Ethernet Screen