User guide

821189: AMP1-16-M User Guide
© 2014 Wohler Technologies, I n c . A l l r ights reserve d .
21
Chap ter 3 AMP1-16-M Graphical User Interface (GUI) Manager
The O pt ions Tab
8. For the
Delay
, click either
No Delay
, or click the up or down
arrows to either increase or decrease the amount of audio delay
time.
9. In the
Speakers/Headphones
area, click either
Not Trim
Controlled
to eliminate trim control altogether,
Always Trim
Controlled
to enable trim control in both the
Trim Screen
and
the
Monitoring Screen
, or
Only When in
Trim Screen
to
enable trim control only in the
Trim Screen
.
10. In the
Volume Control
area, select the way the
Volume
and
Balance
knobs should operate:
A.
Volume/Balance
: This setting selects normal
Volume
and
Balance
control operation as labeled on the front panel. This
is the default.
B.
Left/Right Volume
: This setting reconfigures the
Volume
control to work as a left volume control and the
Balance
control to work as a right volume control.
11. In the
Screen Brightness
area, the select the screen brightness
for each screen and the duration for the screen saver.
A.
Left/Right
: Either click the down arrow to increase or
decrease the screen brightness value, or click the field and
type in a value.
B.
Screen Saver
: Enter the amount of time you want the
monitor to wait until it invokes the screen saver. Allowable
values range in 1 minute increments from 5 minutes to 119
minutes, and in 1 hour increments from 2 hours to 24 hours.
The default setting is 8 hours. If the AMP1-16-M is in
operation for the screen saver time-out period and no front
panel controls have been turned or pressed, the screens will
dim by a certain amount. If double the screen saver time-out
period elapses without any front panel control activity, the
screens will dim further. Operating any button or control will
instantly brighten the screens.
12. In the
Functions Enabled
area, click
Trim Screen
to enable the
Trim Screen
and/or the
Menu System
to enable the menu
system.