User guide

821189: AMP1-16-M User Guide
© 2014 Wohler Technologies, I n c . A l l r ights reserve d .
19
Chap ter 3 AMP1-16-M Graphical User Interface (GUI) Manager
The O pt ions Tab
comprised of the top and bottom field, and each field allows up to
seven characters.
4. Channel Pair Phase Indicators : For each channel pair, click
the button to toggle the phase indication on or off.
5. Trim Gain/Loss : Click the up or down arrows beside each
Trim/Gain Loss value to either increase or decrease the gain or
loss.
6. When you’re done with this screen, click the SDI 2 Setup screen
and repeat Steps 2 through 5 above for the second SDI input.
The Options Tab
1. Click the Options tab.
Figure 3–2 AMP1-16-M Manager Options Screen
2. In the Level Meters area, click the drop downs to select the
Scale , Float , and Bar for your level meter display. Alternatively,