User guide

821189: AMP1-16-M User Guide
© 2014 Wohler Technologie s , In c . A l l rights reserve d .
18
Chap ter 3 AM P1 -16 -M G rap hi ca l U ser Int er fa ce (G UI) Man ager
Runnin g the A MP1 -1 6-M M anager
Running the AMP1-16-M Manager
The AMP1-16-M Manager allows you to customize the monitor’s
configuration to perfectly suit your needs.
The SDI Setup Tabs
Since the SDI 1 Setup and SDI 2 Setup screens are identical, we are
only showing and describing the SDI 1 Setup screen for our example.
1. Launch the AMP1-16-M Manager .
Figure 3–1 AMP1-16-M Manager SDI Setup Screen
2. Channel Assignment : Click the drop downs to select whether
each channel should be directed to the right, left, or both speakers.
3. Channel Pair Naming : In the blank fields at the middle of the
screen, you can add names for any channel pair. Each name is
Note:
When a unit is selected in the Manager's Units Responding
window, a user at the front panel will be prevented from
using the USB port. These lockouts will remain in effect
until the Disconnect From Remote Unit button is pressed .