User guide

821189: AMP1-16-M User Guide
© 2014 Wohler Technologie s , In c . A l l rights reserve d .
16
Chap ter 2 Op erat i on
USB Po rt Fu nc tiona lity
Figure 2–7 Save to Flash Drive Screen
2. Press the file number ( File 1 through File 7 ) of the file you want
to copy from your flash drive. Once the copy process completes,
the Flash Drive Connected screen re-displays.
3. Remove the flash drive from the USB port.
Update Menu
This button only appears if the inserted flash drive contains a software
update files. Press this button to proceed to the software updating
menu. You can copy the software update files to a flash drive using the
PC GUI program. Refer to The USB Tab on page 63. for adding a
software update to a flash drive. Refer to Appendix C: Performing the
Software Upgrade on page 59 for upgrading the AMP1-16-M software.
Save to Flash Drive
File 5
File 6
File 7
File 1
Studio 5
File 2
CancelFile 4
File 3
Select the Flash
Drive file number
1 to 7 in which to
save the current
configuration of
this AMP1-16-M
To exit without saving ,
press Cancel .