User guide

821189: AMP1-16-M User Guide
© 2014 Wohler Technologies, I n c . A l l r ights reserve d .
11
Chap ter 2 Operation
Main Scre en
• Level Meters: All of the channels are metered.
• Channel Selection: There are many ways to select channels for
listening. There are two options located in the Meter Type and
Reference Menu, which give four possible methods of selection.
Regardless of the option settings, the icons in the main screen turn
light blue to indicate the audio channel(s) selected will be summed
to the speakers.
• Mono Channel Select - When set to Disable, both channels of
a pair are quickly selected and deselected by repeated presses
of a Channel Pair Select button. When set to Enable, multiple
presses of a Channel Pair Select button will select or deselect
one or both channels of the pair, allowing you to select
individual channels. For example, using Pair Select 3/4:
o First press selects both channels for listening.
o Second press leaves only channel 3 selected.
o Third press leaves only channel 4 selected.
o Fourth press leaves both channels 3 and 4 deselected.
• Audio Pair Select – When set to Single, only one pair may be
selected at any given time. Selecting any given pair will first
deselect any other pairs. When set to Multiple, any number
of pairs may be selected at one time for listening.
• Adjust the Volume and Balance controls as necessary.
The channel pairs can be given unique names. To do this, simply
connect a PC to the Ethernet port and run the AMP1-16-M GUI
setup program. Refer to Appendix A on page 47.
Icon Color
Light Blue
Triangle or
Square
Channel is selected by the
Channel Pair Select
buttons and can be heard
Dark Blue
Triangle or
Square
Channel is not selected by
the Channel Pair Select
buttons and cannot be heard
Downward
Pointing Red
Triangle
Channel contains a
bitstream instead of audio
and cannot be heard
Table 2–1 Channel Icon Descriptions (Continued)
Attribute Symbol Description Meaning
1
7
9