User guide

821042: RMT-170e Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
28
RMT-170e HD Series User Guide
Using the Function (F) Keys
Using the Function (F) Keys
When the OSD Menu is not displayed, you can press the F keys to
quickly adjust the following parameters:
Technical Functional Overview
Figure 1–7 on page 29 and Figure 1–8 on page 30 illustrate the overall
functionality of the RMT-170e HD Series monitors.
USER
CONFIG
(Continued)
GPI1
TALLY R
TALLY R, TALLY G, SDI1, SDI2,
LINE1, LINE2, DVI-I, H/V
DELAY, MONO, BLUE ONLY,
NORMAL SCAN, OVER SCAN,
NATIVE, ASPECT 4:3, ASPECT
16:9,
or MARKER ENABLE
GPI2
TALLY G
GPI3
SDI 1
GPI4
SDI 2
GPI5
LINE 1
GPI6
LINE 2
CONTROL
KEY INHIBIT
OFF
Inhibits the use of all buttons
except
Power, Menu, and
Volume: ON or OFF
a To modify the options in the COLOR TEMP menu, COLOR TEMP must be set to USER.
b
MARKER is disabled when SCAN is NATIVE, or the input signal is DVI or VGA.
c It may be necessary to turn the monitor off for a moment after switching from HDMI to DVI-D or
from DVI-D to HDMI to correct momentary translation issues.
Table 1–13 OSD Menu Structure (Continued)
Menu Parameters
Default
Value
Domain Range
Table 1–14 F Key Button Functionality
F Button Function
1 Marker
2Audio Meter
3 H/V Delay
4 Native
5Auto Adjust
6 Blue Only