User guide

821042: RMT-170e Series User Guide

RMT-170e HD Series User Guide

Front Panel Controls

• SDI Input 1/2 (Button/Indicator): This indicator glows green when

this input is selected for display on the monitor. As a control, this

button selects the SDI signal for display to the monitor.

• Line 1/2 (Button/Indicator): This indicator glows green when this

input is selected for display on the monitor. As a control, this button

selects the signal for display to the monitor. You can select from

three signal types for Line 2 in the

USER CONFIG menu of the OSD

• DVI-I (Button/Indicator): This indicator glows green when this

input is selected for display on the monitor. As a control, this button

selects the signal for display to the monitor. Select from three signal

types in the USER CONFIG menu of the OSD Menu.

• Aspect (Button/Indicator): This indicator glows green when a non-

default aspect ratio has been selected for this signal. As a control,

this button toggles between 4:3 and 16:9.

• F1 through F6 (Buttons/Indicators): These indicators glow

greenwhen the associated function is active.

• Status (Button/Indicator): Pressing this button toggles the status

display (not a menu) on and off to the monitor. If the button is not

pressed a second time, the status will disappear after several

seconds.

OSD Menu Buttons

• Menu (Button): Pressing the Menu button displays the OSD menu.

Refer to Using the OSD Menu on page 19 for more details.

• Up/Down (Buttons): Pressing these buttons after pressing the

Menu button navigates through the menus and submenus up or

down respectively. Neither of these buttons functions when the

OSD Menu is not displayed on the monitor.

• Enter (Button):The Enter button selects menus, submenus, and

option values in the OSD Menu. When the OSD Menu is not

displayed on the monitor, this button displays F1 to F6 functions

assignments.