Instructions

1. Description of the controls
1. Reduce brightness /
30 minutes off
Functions of the buttons
2. Increase brightness /
60 minutes off
3. Increase colour temperature /
45 minutes off
4. Reduce colour temperature /
15 minutes off
5. ON/OFF Timer
6. OFF/Night light
2. Connect and disconnect
Connect
Switch off the lights for at least 10 seconds and switch them on again.
Press the button 5. ON/Timer 3 times (within 3 seconds). The light blinking 3 times signals that the
connection has been successfully established.
Disconnect Switch off the lights for at least 10 seconds and switch them on again.
Press the button 5. ON/Timer 5 times (within 3 seconds). The light blinking 5 times signals that the
connection has been successfully terminated. The connection can be established again, as described
above.
3. Night light mode
To switch on the night light mode, please keep button 6. OFF/Night light pressed for at least 2 seconds. The brightness level of
the night light is 3% of the maximum brightness. To go back to the previous mode, please press any button.
4. Timer for switching off the lights
To switch on the timer-setting mode, please keep button 5. ON/Timer pressed until the LEDs blink once. Within 3 seconds,
select one of the buttons that determine the time setting of the timer. The LEDs blink 1 to 4 times (each light pulse indicates a
time duration of 15 minutes).
Press
One light pulse indicates a time setting of 15 minutes
Press Two light pulses indicate a time setting of 30 minutes
Press
Three light pulses indicate a time setting of 45 minutes
Press Four light pulses indicate a time setting of 60 minutes
Press
Exit timer-setting mode
5. Saving the settings
The brightness and the colour temperature are saved after the remote control is turned off; you don’t need to reset them when
you turn it on again.
GB 05
Wortmann & Filz GmbH . Im Langel 6 . D-59872 Meschede
©
WOFI LEUCHTEN
+49/(0)2903-449 449 +49/(0)2903 - 449 459 kundendienst@wo.de www.wo.de

 