Operating instructions

4
Before starting the mixer:
Mount the required tool in the bayonet shaft. Place the bowl
in the bowl arms and raise it to its working position by means
of the handle for bowl lift. Close the safety guard.
The mixer is ready for start.
Start the mixer:
Push to start the mixer.
Push to increase the speed.
Push to reduce the speed.
Or push , , or to choose one of the xed
speeds.
The speed indicator below the elds
to shows the
mixing speed of the tool.
Four xed speeds:
For quick choice of speed, use the elds to .
Field corresponds lowest speed, aprox. 110 RPM.
Field corresponds aprox. 212 RPM.
Field corresponds aprox. 318 RPM.
Field corresponds maximum speed, aprox. 420 RPM.
It is possible to change the xed speeds - see the para-
graph „Change of xed speeds“.
Indication of operation time:
Before starting the mixer, an operation time for the mixer can
be chosen by pushing
or . The operating time will be
shown in minutes and seconds in the timer eld between
and .
The maximum operating time is 60 minutes.
Inspection of the ingredients during operation:
If it is wished to stop the mixer without reducing operation time
and speed, push
. The mixer will reduce speed and then
stop, the operation time will also stop.
It is now possible to open the safety guard to check the
ingredients.
Close the safety guard and push
, and the mixer will start
and will increase the speed to the speed chosen before pushing
. The operating time will also be continued.
If the bowl is lowered while the mixer is stopped, the operating
time is reset, and
must be pushed to restart the mixer.
Start/Stop
Pause
REMIX-function
Time up
Text eld (timer)
Time down
Fixed speeds
Speed indicator
Speed down
Speed up
operatIon of the mIxer:
Emergency
stop
For previous users of the old 10 L model, AR10:
On the AR10 the speeds 1, 2 and 3 corresponded
the below mentioned RPM:
Speed 1 corresponded approx. 110 RPM.
Speed 2 corresponded approx. 150 RPM.
Speed 3 corresponded approx. 380 RPM.