Operating instructions

3
1
3
2
4
Vl2 Control panel - surVey of VarIous operatInG sItuatIons:
The following pictures show various operating situations and corresponding explanation:
The mixer is connected to power and is ready for start
- ashing of the green diode at
will show that!
It is possible to set a start speed by pushing one of the
xed speeds or
, before is pushed.
When
is pushed, the mixer will start in minimum speed.
Operating time is stated by pushing
or .
A program is run by rst pushing and thereafter the
wanted number, e.g for program No. 1.
Emergency stop is activated - there is no light in the
display. If the red diode at
is ashing, the mixer has
stopped because the safety circuit has been interrupted,
either because the bowl arms have been lowered or the
safety guard has been opened.
The mixer is running and a speed has been chosen -
four diodes on the speed indicator are alight.
The speed can be changed by pushing one of the buttons
for the four xed speeds or
or .
The mixer can be stopped without reset of the timer, by
pushing
or by opening the safety guard. The mixer is
restarted by pushing .
has been pushed - yellow diode at is ashing. The
mixer is started by pushing . The timer will start again
and the speed is running up to the chosen speed. If is
pushed, the timer is reset and the mixer will not start, but is
ready for start - green diode at
will ash (see picture 2).
Voltage at the installation: 50/60 Hz The machine sign
Power:
Phases x voltage
With
neutral
Earth Voltage Phases Use
neutral
Use
earth
Remarks
1 x 220-240V Neutral yes 230V 1 yes yes
Please note that the mixer is able to run without
any connection to earth, but this causes a re-
duced functionality of the EMC-lter due to lack
of leakage to earth.
Of functional and safety reasons, the
machine should be connected to earth!
.
2 or 3 x 220-240V - yes 230V 2 - yes
2 or 3 x 380-415V Neutral yes 230V 1 yes yes
2 or 3 x 380-480V - yes 380-480V 2 - yes
2 or 3 x 110-220V Neutral yes 100-110V 1 yes yes
1 x 100-120V Neutral yes 100-110V 1 yes yes
3 x 100-120V - yes 100-110V 2 - yes
examples of power ConneCtIons: