Operating instructions

12
10
10B
10A
11
11A
11
11C
11B
10 Take out the planetary head in the following way:
a) Take off the lid of the mixer (2), the operation panel (3), the attachment drive (4), the Poly V-belt (6) and the
planetary head pulley (6D).
b) Remove the locking ring (10A), and the planetary head can now be loosened by hitting the shaft (10B) with a
plastic hammer. Take care not to drop the planetary head.
c) To mount the planetary head again, use a special tool to pull it to its correct position and thereafter follow the
above instructions in reverse order.
11 5A fuse can be exchanged by pulling out the
small “drawer” (11A) at the top of the cable
plug (11B). If the fuse is burned, it can be ex-
changed by the reserve fuse (11C).
cable plug
(11B)