Operating Instructions

How to use Aux in:
Audio JACK /Aux in play mode: Using a right Aux in line to connect between your playing
device without Bluetooth and our player Aux in jack() on the back panel.Then the sound
will be transferred from another playing device to our player.
How to use RCA out:
RCA output Jack/Connect to speaker: Using a right audio date line to connect between
your external speakers(active speakers only)and our player RCA out jack on the back
panel.Then the sound will be transferred from turntable to your lovely external active
speakers.Warmly note,our player sound still be spoke out.
Turntable specification
Item
Specification
Bluetooth version
V4.2
Bluetooth effective range
≦10m
Frequency response range
120Hz—16kHz
Charging function
USB charging 5V
Speaker output power
5W×2
Speaker impedance
4Ω
Operating temperature range
-10℃—+40℃
Adaptor
DC5V 1.5A
How to replace the turntable stylus()
Removing the stylus from the Tone Arm Clip()
Place a screwdriver at the tip of the stylus and push downward as shown in direction”A”
1. WARNING:When applying force to stylus too much may damage or break the stylus.
2. Remove the stylus by pulling the stylus forward and pushing downward.
W
Installing the stylus
1. Hold the tip of the stylus and insert the stylus by pressing as shown in direction “B”
2. Push the stylus upwards as in direction “C”until the stylus locks into the tip position.
WOCKODER