Operating Instructions

1. Dust cover 盖子
2. Turntable player 机身
3. 45RPM fixator 调节器
4. Tone Arm 唱杆
5. Tone Arm Raise Lever 唱杆提升杆
6. Tone Arm Clip 唱杆夹子
7. Stylus 唱针
8. Auto Stop Switch 自动启停开关
9. LP Speed Switch 转速开关
10.Power on/off and volume control 开关、音量控制
-Short time knob press to power on
-Long time knob press to power off
-Rotate L/R to turn up/down the volume
11.Headphone jack 耳机插孔
12.Light indicator 指示灯
13.Power adaptor jack 电源适配器插孔
7&8.RCA output jack(for active speaker)RCA 插孔
10. Aux in jack Aux in 插孔
Know our playing function
After connect the power adaptor,press the Power button（）,the player starts to work while
voice reminding and LED blue light. Please refer to below description to better operate.
How to play Bluetooth:
Bluetooth play mode: Bluetooth mode as default .Press the Power button(),the player
starts to work while voice reminding and LED blue light flash() quickly. You can hear the
voice:”The Bluetooth device is ready to pair.’’Once paired,the Blue light flash slowly.The
lovely songs on your Bluetooth device will be transferred to turntable to sound and control.
How to play LP:
LP disk play mode: It shows enter to LP mode successfully once you can hear the voice
”
Di
dong
”
.Then place a LP disk on the turntable platter and select the desired speed(33/45/78)by
sliding the speed selection switch() according to the LP disk specification.Open the tone
arm clip() to release the arm upon the LP disk, and push the Arm Raise Lever() backwards
to raise the arm.Gently move the tone arm() to the desired slowly,then close the arm clip().
Note:When the auto stop switch is turned on,the turntable will continue to spin no matter
LP playing or not.
Warning:Do not manual lower the tone arm onto the LP disk,to avoid LP disk and stylus()
damage!