Operating instructions

25
7 Operation
7.1 Starting the cup rack
Fill up the cup rack with cups.
Plug the power lead into a shockproof socket and open the
front door 4 to access the cup rack On/Off switch. Press the
right-hand On/Off switch 3 to switch on the cup rack.
It takes about 60 minutes for the full cup rack to warm up
to its operating temperature.
Caution! Burning hazard!
The glass shelves 1 of the cup rack heat up in use.
7.2 Starting the cooler
Note:
The cooler should be switched on at least an hour
before use to allow it to reach its operating
temperature. If the machine has been carried in a
non-vertical position, it must be allowed to stand in
the vertical position for at least an hour after
installation before switching on the cooler.
Plug the power lead into a shockproof socket and open the
front door 4 to access the cooler On/Off switch. Press the
left-hand On/Off switch 3 to switch on the auxiliary cooler.
The cooler is fitted with a thermostat to keep the set
temperature constant automatically.
The thermostat is set at the factory to a milk temperature of
≤ 4°C.
Call WMF Customer Service if you wish to alter the
thermostat setting.
3
3