Operating instructions

21
2 General description
The WMF cup & cool is a combination of a cooler and a cup rack.
The cooler is designed for hygienic storage and cooling of milk for preparation of coffee products
made with milk, such as Cappuccino or milky coffee (Caffe Latte). Milk is supplied from the
cooler to the milk frother via a hose.
The cup rack is designed to hold cups, coffee pots and mugs ready for use. The specially coated
toughened safety glass shelves enable the cups to be evenly heated. The heating power is designed
for the heated glass shelves to reach a temperature of up to 80 °C in approx. 60 minutes when the
cup rack is full.
The cup & cool is an attachment for installation to the left of the main machine.
3 Warnings
Maximum machine safety is an integral WMF product characteristic to which we pay
particular attention.
In spite of all our safety precautions, however, every machine is potentially hazardous if not
operated properly.
This is why – for your own safety – we have summarised the warnings below and highlighted
them in grey throughout the instruction manual.
Please also follow the Safety instructions on page 22.
For your own safety, please
observe the following
 Connection of the machine and starting up for the first
time must only be carried out by WMF Customer Service.
instructions at all times:
 All repairs must only be carried out by WMF
Customer Service, using original parts.
 In no circumstances should the safety devices fitted be
tampered with. Never remove any machine body parts.
 Caution! Burning hazard!
The glass shelves 1 of the cup rack heat up in use.
 Caution! Health hazard!
Follow the precautions on the pack when using the
cleaner. The cleaner is an irritant.
 Caution! Burning hazard!
Switch off the machine at the On/Off switch 3 before
cleaning. The glass shelves 1 of the cup rack heat up in
use.