Operating instructions

7.3 Filling the milk tank

Note:

The cooler is designed to keep milk cool, not to

refrigerate milk from room temperature. Always

used pre-cooled milk.

Turn the key to the left in the lock 2 to open the

front door 4. Pull the milk tank 6 a little way out and fill it

with pre-cooled milk. Push the milk tank 6 back into the

cooler and close the front door 4.

7.4 Switching off

Note:

Cleaning must always be carried out before

switching off the machine (see chapter 8 8

Cleaning on page 27).

Switch off the cup rack and the cooler at the respective

On/Off switches 3.

If the machine is to be shut down for an extended period,

clean the inside and leave the front door 4 open.

7.5 Defrosting

As soon as the layer of ice is 3 mm thick, the cooler needs

to be defrosted.

To defrost, switch off the cooler at the (left-hand) On/Off

switch 3. The front door 4 can be left open to speed up

defrosting. Wipe up the water that gathers with a soft cloth.

Remember to close the front door 4 before switching on the

cooler again.

Note:

Never use pointed or sharp metal implements to

remove the layer of ice, as this could damage the

surface of the cooling chamber.