WMF COFFEE MACHINES Operating Instructions WMF CUP & COOL Series 9465 Edition 3 - Printed in 03.08 Item-No.
Congratulations on your purchase of a WMF cup & cool. Its advanced technology, long service life and economy will delight you. Are you one of those people who doesn’t like reading operating instructions? Please do so anyway! You will get more pleasure from your WMF cup & cool afterwards and will find it was worth it after all. In your own interest, please follow all warnings and safety instructions. This will help to avoid accidents and technical malfunctions.
CONTENTS 1 Designation of machine parts........................................................................................................... 20 2 General description........................................................................................................................... 21 3 Warnings............................................................................................................................................ 21 4 Safety instructions......................................
1 Designation of machine parts 1 2 3 5 4 6 1 Heated glass shelves (toughened safety glass) 2 Front door lock 3 On / Off switch for cup rack (right) and cooler (left) (switches are accessible from below when the front door is open) 4 Front door 5 Milk hose duct 6 Milk tank (approx. 9.
2 General description The WMF cup & cool is a combination of a cooler and a cup rack. The cooler is designed for hygienic storage and cooling of milk for preparation of coffee products made with milk, such as Cappuccino or milky coffee (Caffe Latte). Milk is supplied from the cooler to the milk frother via a hose. The cup rack is designed to hold cups, coffee pots and mugs ready for use. The specially coated toughened safety glass shelves enable the cups to be evenly heated.
4 Safety instructions General notes 1. At the end of the working day, always ensure that the main power switch to which the machine is connected and/or the On/Off switches 3 are switched off. 2. If malfunctions occur, call WMF Customer Service. Do not switch on the machine again until the problem has been corrected. 3. This machine is not for use out of doors. 4. Switch off the machine at the On/Off switch 3 before cleaning. 5. Never spray the machine with a hose or steam jet.
5 Technical data Rated power 200 Watt Capacity / tank Up to 9.5 litres (milk tank 33 2175 7000) Cooling temperature Adjustable between +0°C and +8°C ±2°C Refrigerant 50 gr. R134a class N No. of cups 60-95 Glass shelf temperature ≤ 80°C Power supply External dimensions Width Height Depth Empty weight Continuous sound pressure level (Lpa)* 1/N/PE 50 Hz/230 V 350 mm 600 mm 516 mm approx. 31 kg < 70 dB (A) Technical data subject to change without notice.
6 Conditions of use and installation The machine operator must arrange for the site preparatory work. This should be carried out by approved contractors in accordance with general and local regulations. WMF Customer Service technicians are only permitted to connect up the machine to the prepared connections. They are not authorised to carry out plumbing or wiring work on site and will not be responsible for such work. Rated power 200 Watt Connecting cable, site supply* 3 × 1.
7 Operation 7.1 Starting the cup rack Fill up the cup rack with cups. Plug the power lead into a shockproof socket and open the front door 4 to access the cup rack On/Off switch. Press the right-hand On/Off switch 3 to switch on the cup rack. 3 It takes about 60 minutes for the full cup rack to warm up to its operating temperature. Caution! Burning hazard! The glass shelves 1 of the cup rack heat up in use. 7.
7.3 Filling the milk tank Note: The cooler is designed to keep milk cool, not to refrigerate milk from room temperature. Always used pre-cooled milk. Turn the key to the left in the lock 2 to open the front door 4. Pull the milk tank 6 a little way out and fill it with pre-cooled milk. Push the milk tank 6 back into the cooler and close the front door 4. 7.4 Switching off Note: Cleaning must always be carried out before switching off the machine (see chapter 8 8 Cleaning on page 27).
8 Cleaning 8.1 Cleaning the cup rack Note: Always ensure the machine is switched off at the On/Off switch 3 before cleaning. Caution! Burning hazard! The glass shelves 1 of the cup rack are hot. Never spray the machine with a water jet or steam cleaner. Clean the surface of the cup rack and the glass shelves 1 with a damp cloth. For care of the metal panelling parts (matt surface) we recommend WMF Purargan forte (order number 14 2831 9990) from the WMF care range. 8.
Important! Caution! Health hazard! Follow the precautions on the pack when using the cleaner. The cleaner is an irritant. Rinse off with clean water and dry the cooler thoroughly, using a soft cloth. Important: Never use abrasives. Wipe over the outside of the cooler with a damp cloth. For care of the metal panelling parts (matt surface) we recommend WMF Purargan forte (order no. 14 2831 9990) from the WMF care range.
The customer must notify WMF promptly in writing of any defects of quality. Replaced parts become the property of WMF. In all cases, WMF shall first be given an opportunity of subsequent performance within an appropriate time. The customer shall place the subject of the complaint at WMF’s disposal. No warranty applies in respect of: - - - All parts subject to natural wear and tear.
