User manual

39
Care
Descale coffee machine
Do not drink the descaling solution that comes out of the spout during descaling.
Total duration of descaling approx. 37 minutes. The procedure may not be interrupted.
Press the care button
>
Empty the drip tray >
>
Pull the water tank out of the machine towards the front
Remove the filter cartridge if a water filter is used (important)
>
Pour a whole bottle of WMF liquid descaling agent (750 ml) into the water tank >
Fill the water tank with water >
Remove the milk foamer and the milk hose >
>
Place an appropriate container (min. 3 litres) under the All-in-One professional spout
Place another container (min. 1 litre) under the hot water spout
>
Start the descaling with the care button >
The descaling begins.
A minute countdown indicates how long until the descaling will finish.
After approx. 30 minutes, the following displays appear:
Empty the water tank and rinse thoroughly with clear water
>
The remaining descaling solution must be emptied from the tank so that the coffee
machine can then be rinsed with clear water and no descaling solution remains in the
coffee machine.
Confirm with the P button
>
Fill up the water tank >
Continue the descaling by pressing the care button >
machine descaling
OK:P brwse.:care-bt
See
“Cleaning the milk system”
Place container underneath
Tip:
Instead of two containers, you can use
a sufficiently large container which fits
under both spouts.
descaling ...
time remaining: 37 min.
empty water tank
OK: P
refill water tank
OK: care