User manual

36
Care
The coffee machine‘s milk system is rinsed with hot water.
Hot rinse water is emptied through the All-in-One professional spout.
After a successful rinse, the following display appears:
Turn the milk hose anticlockwise, disconnecting it from the hot water spout
>
After the rinse, some hot water remains in the milk hose. Hold the open end of the milk
hose over the drip tray so that the remaining rinse water can run out.
If products with milk were prepared, after 20 minutes or at the latest when switching off,
the machine automatically requests a milk system rinse. Confirm with the P button and
perform the milk system rinse.
The All-in-One spout is cleaned by a pulse of steam at the same time.
The milk rinse can be delayed with the Off/C button.
Cleaning the machine - Cleaning program
Confirm machine cleaning with the P button >
The individual steps appear on the display on request >
Do not drink the cleaning solution that comes out of the spout during cleaning.
your selection pls
08:15 17.10.2007
Observe manual milk system cleaning!
See Page 41
machine cleaning
browse: care button
Start the care program without request,
see page 34
The cleaning program takes 5 minutes.
refill water tank
empty drip tray