User manual

34
Care
General care program
When switching the machine on and off, an automatic coffee system rinse starts automatically. This
requires that sufficient water be in the tank at all times.
The rinse water (min. 200 ml) is caught in the drip tray. Empty the drip tray regularly or place a
container under the All-in-One professional spout during the rinse.
After each brewing cycle, in the heating up phase and during the care programs, so-called release
water runs into the drip tray. This rinses any remaining coffee from the pipes. This is a completely
normal procedure and not an error in the coffee machine.
WMF assumes no liability for damage due to lack of cleaning or descaling or due to the
use of other cleaning or descaling agents than those provided by WMF. All guarantee and
warranty claims then lapse.
Cleaning and descaling agents are irritants and during execution of the programs, they
become very hot. Avoid any contact with these liquids. The plastic parts of the coffee,
with the exception of the water tank, machine may not come into contact with the
descaling agent.
Follow the instructions on the packaging and in the Safety chapter.
Call up the care program
To select the care programs without a previous request on the display:
Press the care button for approx. 2 seconds
>
Use the care button to browse to the desired program >
Select the displayed program with the P button >
select care program
browse: Care button