User manual

26
Settings
1x brief 1x espresso 1x café crème 1x brief
no setting no setting
1x long 1x ristretto 1x mug café crème 1x long
1x brief 1x cappuccino 1x latte macchiato 1x brief
no setting no setting
1x long 1x cafe latte 1x espresso macchiato 1x long
For “2x brief” beverages, no setting is necessary, the beverage settings always correspond
to the recipe for a “1x brief” beverage.
Water volume
Example: press the plus button until the water volume is increased to 37 ml
>
You can start a preparation test with the new values at any time.
Place an appropriate drinking vessel under the All-in-One professional spout
>
Press the beverage button again >
The beverage is dispensed >
If the beverage is to your taste, confi rm the settings by pressing the P button >
Coffee strength
The grinding quantity varies depending on the grinding degree setting, the type of coffee used, the
humidity and various other factors.
Determine the desired coffee strength with a dispensing test.
Technical Data,
See
“Technical Data” chapter
water volume: 35ml
OK: P change: -/+
water volume: 37ml
OK: P Test:bev.btn.
water volume: 37ml
OK: P change: -/+
strength: 100% 4,4s
OK: P change: -/+
For espresso, the factory setting at
100% corresponds to a grinding time of
4.4 seconds.
In which 1,8 grams of espresso are ground
per second.