User manual

12
Start-up program
Water hardness
Set the result of the carbonate hardness test here
>
Water filter
Enter here whether you are using a tank filter (recommended with water hardness
>
5 °dKH and higher)
If “water filter” is set, then the filter should be rinsed now.
Set a container with approx. 3 litres capacity under the hot water spout
>
When rinsing the filter, you will hear unusual noises. This is normal. The noises will end during the
filter rinse.
The machine now heats up.
After the machine is heated up, there is a coffee system rinse. This warms up all the pipes.
Place a container for the rinse water (approx. 120 ml)under the All-in-One professional spout
>
The coffee system rinse lasts approx. 40 seconds; after this, the machine is ready to operate.
water hardn.: 13-16
OK: P change: -/+
Carbonate hardness test See included
accessories
water filter: No
OK: P change: -/+
Rinse filter:
Follow the display messages
See Water filter insertion
in “Start-up” chapter
See Change filter
in “Care”
place 3L container
under h.w. spout
heating up...
your selection pls
08:15 17.10.2007
Cup preheating
P
Select/confirm
Care button
–
Page backwards
Reduce value
+
Page forwards
Increase value
The new values are saved when you exit
the program.