User manual

10
Start-up program
Fill the water tank
Fill the water tank with cold tap water (max. 2.8 litres) >
Slowly slide the water tank back into the machine >
Fill the water tank only with fresh, cold water. Never use hot water, mineral water, milk or
other liquids.
Connect the milk hose to the milk
Place the refrigerated milk directly to the right of the machine >
Place the milk hose with the milk nozzle on it into the milk container. The hose end with
the milk nozzle should reach the bottom of the milk container.
Milk is a very sensitive food. When handling milk, always ensure cleanliness. Only open
packs with clean hands and utensils. Take care that no bacteria can be introduced into
the milk.
Fill the coffee bean hopper
> Open the cover towards the back
Pour in the coffee beans (max. 320 g)
>
Close the cover >
Once roasted coffee beans have been unpacked, they lose their aromatic components
within days. Therefore only pour as many beans into the coffee bean hopper as you
expect to use in the next few days; frequent topping up is better.
Ensure that no foreign bodies land in the coffee bean hopper. Such foreign bodies can
damage the grinders of the coffee mill. This damage is excluded from the warranty.
Do not reach into the bean opening of the mill.
Each coffee machine is thoroughly tested
before shipment.. Therefore, coffee
grounds residue may remain in the grinder.
Your coffee machine is not used.