User manual

8
Start-up program
Start-up
Unpacking and setting up
Unpack coffee machine and set it up on a stable, horizontal support >
Always follow the safety instructions in the “Safety” chapter, starting on page 57.
Check the coffee machine for possible transport damages
>
Plug the connector into a grounded outlet >
Insert drip tray and drip tray grid >
Test the water hardness
Briefly dip carbonate hardness test strip into water (approx. 1 second) >
One minute later, read the degree of hardness on the colour scale of the test strip package >
The water hardness is set during start-up.
Prepare the water tank
Remove the water tank from the coffee machine >
Remove all accessories from the water tank >
Rinse the water tank thoroughly with tap water >
Do not put the water tank back into the machine yet. The milk hose must be assembled first.
Insert the WMF water filter
The WMF water filter ensures the best coffee quality and protects the coffee machine from calcium
deposits.
With water hardness 0-4, do not use a water filter.
Remove the built-in filter from the front of the water tank
> [1]
Place the cartridge adapter on the water spout supports from above (lock pulled) and fix it by
>
pressing the lock down [2]
Water tank
Drip tray and drip tray grid
Cable compartment