User manual

Display messages
84
The grinder is blocked by a foreign body.
> Switch off the machine and pull out the mains cable.
> Clean the bean hopper.
> Insert the multitool (1) in the 2 holes (1a, 1b) in the
grinder.
> Turn the grinder (1) in a clockwise direction to remove
foreign bodies.
> Switch on the machine.
> Start the grinder by pressing the beverage button.
> If the grinder is free again: Reset the grinding grade.
Grinding too fi ne.
> Set the grinding grade to be coarser
> Switch off the coffee machine.
> Allow the coffee machine to cool down.
> Again switch on the coffee machine.
On recurrence, the fault must be rectifi ed by the WMF
Service-Center.
grinder blocked
Grinder
temp.sensor steam
Temperature sensor
temp.sensor water