User manual

Care
68
> Pull out the water tank (7) and the coffee grounds container (11).
> Remove the residues of ground coffee in both the openings (7a, 11a), for example, with a vacuum cleaner.
> Turn the thread on the brewing unit head with the Multitool in a clockwise direction until the black
scraper folds in again.
> Insert the dried brewing unit till the lock clicks into place.
> Close the lid of the brewer.
Caution!
Possible damage to your automatic coffee machine!
> Never force the brewing unit into your automatic coffee machine.
> When the brewing unit sticks, turn the thread at the brewing unit head slightly to the left or right with
the Multitool.
Tip: If the brewing unit cannot be replace properly, consult the troubleshooting section on page 87.