User manual

Care
51
Steps for care Care interval
Cleaning the coffee grounds container
- According to the request in display
(dependent on the number of brewings).
Clean the water tank -weekly
Empty drip tray -daily
Clean the bean hopper -weekly
Clean machine housing -weekly
After 10000brewings, it is recommended that the maintenance of the device be carried out by the
WMFServicecenter. An instruction appears in the display while switching on. The instruction is repeated
after sometime.
4.2 Customer Care programmes
Adequate water is required in the water tank is required for automatic rinsing of the coffee system.
The rinse water is collected in the drip tray.
> Empty the drip tray regularly or place a container under the All-in-One spout during the rinse.
After each brewing cycle, during the heating up phase and during the customer care programmes,
so-called release water runs into the drip tray. This rinses any remaining coffee from the pipes. This is a
completely normal procedure and not an error in the automatic coffee machine.