User manual

30
User Manual WMF 1400
Software
Display Contrast
Contrast of the display is set here.
(Default value is 70)
Filter/Softener Fitted
Whether filter is fitted or not is entered here.
This affects the descaling intervals.
Water Hardness/Capacity
On plumbed coffee machines with a constant water
supply (without anti-scale filter, optional) and coffee
machines with a water tank the water hardness (carbo-
nate hardness) is set here.
With fitted filter and constant water supply:
Filter capacity is set here.
(Filter capacity can be found in the anti-scale filter
documentation.)
Warm-Up Rinse
Here enter the setting as to whether the coffee machine
should rinse out the brewing unit with hot water after
heating up.
Recommended setting: active.
Operating options
The following operating options are available.
Warm Up Button (active/inactive)
Barista pad (active/inactive)
Second Level Toggle Pad (active/inactive)
ON/OFF button (direct/via PIN)
Menu pad (immediate/delayed)
Warm up pad
Self-service recommendation: inactive
Barista pad
Self-service recommendation: inactive
Second Level Toggle Pad
Self-service recommendation: inactive
•
•
•
•
•
Contrast Contrast
Filter/Softener Filter/Softener
Water Hardn. Water Hardn.
Capacity Capacity
Warm-Up Rins. Warm-Up Rins.
Options Options
If customers serve themselves
some functions can be switched
to inactive. The inactivated
pads will not be shown on the
readiness state display.
If customers serve themselves
some functions can be switched
to inactive. The inactivated
pads will not be shown on the
readiness state display.