User manual

27
User Manual WMF 1400
Software
After the final rinse the steam boiler is heated. The hot
water expands and finally exits briefly as steam.
Descaling is complete. Completion is indicated on the
display.
Filter Change
If the filter capacity is exceeded there will be a message
once per day that a filter change is due.
The filter must be changed within one week otherwise
the message will be displayed after every brew.
Change filter.
Confirm filter change.
After filter change there is an automatic program
sequence to rinse and bleed the anti-scale filter and
water system.
Rinse Filter
The Filter Rinse option enables water system and filter
rinsing and bleeding following long intervals in operation.
Touch Filter Rinse .
Customer Check-up
After every 10,000 coffees there is a daily message to
the effect that customer attention is due.
This must be carried out within one week, otherwise the
message is displayed after every brew.
Carry out Customer Check-up operation 1/10.000.




Attention! Hot steam!
See Safety chapter!
Attention! Hot steam!
See Safety chapter!
Filter Change Filter Change
Observe anti-scale filter
instruction!
Displays lead step by step
through the program.
Follow instructions!
Observe anti-scale filter
instruction!
Displays lead step by step
through the program.
Follow instructions!
Attention!
Scald hazard!
Attention!
Scald hazard!
Rinse Filter Rinse Filter
Attention!
Scald hazard!
Attention!
Scald hazard!
See Customer Check-up
Instruction 1/10.000
See Warranty chapter!
See Customer Check-up
Instruction 1/10.000
See Warranty chapter!