User manual

20
User Manual WMF 1400
Software
Timer State
Touch Timer State .
Activate/deactivate timer.
Set Timer
Touch Set Timer .
To set on/off times.
Touch Running Time .
Running Time display appears.
Here the day, time and desired operation is set.
Set day (Day).
1 = Monday
2 = Tuesday, etc, up to 7 = Sunday
1-5 = Monday to Friday (weekdays)
1-7 = Entire week (Monday to Sunday)
Set time: (hr, min).
Set desired on/off times.
Set desired event (Action).
“On” Time • =
I
(on display)
“Off” time• =
O
(on display)
Confirm with OK
Display programmed event times: Prg
Programmed event times are displayed here. Up to 16
event times per day are possible.
Programmed times are listed chronologically.
Any new time is chronologically sorted immediately on
input and confirmed with OK .
Touching directly accesses Timer Overview.




•
•
•
•






Timer State Timer State
When Timer is activated the
Timer symbol, a little clock,
appears in the display.
When Timer is activated the
Timer symbol, a little clock,
appears in the display.
Set timer Set timer
Example:
For day 1-5 or day 1-7 timer
events may be copied to the
day set.
Adjust settings with pads:
+ and -
Updated selection is inversely
displayed!
Example:
For day 1-5 or day 1-7 timer
events may be copied to the
day set.
Adjust settings with pads:
+ and -
Updated selection is inversely
displayed!