User manual

52
User Manual WMF1200S
Care
Rinsing
Rinsing starts. Duration approx. 11minutes. After the
initial rinsing from the water tank, the display requests
that the water supply be turned on again.
 Turn on mains water tap
Leave the water tank in place. The water tank coupling is
rinsed for approx. 10seconds from the mains supply.
Follow-up and additional rinse
Duration: approx. 11minutes.
 Remove water tank and dry
 Turn and remove seal plug on water tank coupling in
aclockwise direction (flat screwdriver, see illustration
1and2)
 Replace the water tank
Subsequent rinses are from the mains supply.
After the final rinsing the steam boiler is heated up. The
hot water expands and finally exits briefly as steam.
As soon as the descaling procedure is finished, the “Ready
to operate” display appears.
 Remove the collection container
 Re-install the milk hose
6.7.2 Descaling machine with water tank
Preparation
 Touch
 Touch until the desired program is displayed
 Select the desired program with
 Remove the milk hose
 Remove and empty drip tray
 Replace drip tray
 Remove water tank
Caution.
Hot steam.
Observe the Safety chapter.
your selection pls
08:15 02.05.2012