User manual
49
User Manual WMF1200S
Care
Lift bean hoppers out
Completely empty bean hoppers and wipe out
thoroughly with adamp cloth
Allow bean hoppers to dry completely
Refill and replace bean hoppers
Lock with the multitool by turning counter-clockwise
Never reach into the coffee grinders.
Never clean the bean hoppers in adishwasher.
6.5.3 Product hopper cleaning (optional)
Choc/Topping
Cleaning will be more frequent depending on powder
consumption.
Press the ON/OFF switch for longer than 2seconds until
coffee machine switches off
Disconnect mains plug
Unlock product hoppers with multitool by turning in
aclockwise direction
Lift product hopper out and empty completely
Unscrew union nut at front and rear
Remove the dosing auger
Never clean product hoppers in the dishwasher.
Thoroughly wipe out hopper with adamp cloth
Thoroughly clean individual dosing auger components
Allow product hopper and individual components to dry
completely
Caution.
Bruising or crushing
hazard.
Observe the Safety chapter.
open close
Risk to the machine.
Follow the manual.
Portion controller with individual
parts of the dosing auger










