User manual

33
User Manual WMF1200S
Settings, Basic settings
4.4.4 Switch on time
Automatic switch on time for the coffee machine.
If set to “off”, the machine will not be switched on
automatically.
If set to “on”, the clock time can be set using
and .
 Confirm the desired setting with
4.4.5 Milk foam quality (optional)
Milk foam quality for all beverages with milk foam. Setting
used to compensate for variations in milk characteristics.
Reduce setting value -> finer foam and lower dispensing
temperature
Increase setting value -> greater foam level and higher
dispensing temperature
 Confirm the desired setting with
4.4.6 Topping quality (optional)
Quality of Topping additive. This setting will apply
to all beverages with Topping. Variations in Topping
characteristics are compensated for with this setting.
Reduce setting value -> less powder in relation to the
amount of water
Increase setting value -> more powder in relation to the
amount of water
 Confirm the desired setting with
switch on time: off
OK: P change: -/+
foam quality 100%
OK: P change: -/+
topping quality xxx
OK: P change: -/+