User manual

18
User Manual WMF1200S
Operation
Chapter 3 Operation
A display-guided start-up program helps perform initial
start-up after delivery from the factory.
3.1 Switch on coffee machine
 Switch on coffee machine using the ON/OFF switch
Coffee machine switches on and heats up.
An automatic warm rinsing starts.
When the coffee machine is ready to dispense beverages,
the “Ready to operate” display appears.
3.2 Beverage dispensing
Pressing the beverage buttons triggers dispensing of the
beverage selected.
• Lit up button = ready to dispense
• Flashing button = beverage dispensing
• Unlit button = not ready to dispense /
button disabled
 Place asuitably sized cup under the combi spout
 Press the desired beverage button
Desired beverage is indicated on the display.
Cancel beverage dispensing
 Touch
Second beverage level (optional)
When the second level is activated:
 Briefly press the beverage button twice
The beverage on the second level is initiated.
Initial start-up
w Start-up
page 10
Change PIN
w Settings
w Basic settings
page 38
Set the switch on and switch off
times
w Settings
w Basic settings
page 32
Caution.
Hot liquids in the
dispensing area.
Observe the Safety chapter.
Office functions
w Settings
w Basic settings
page 35