Operating instructions

64
8.2 Setting quantities
Use the / keys to choose between froth quality and
quantities in the setting program.
ENTER
Select Quantities
/ < / > / ENTER/EXIT
Pressing the ENTER key takes you into the quantity setting
program.
Press start button!
> Quantity selection
Press the beverage key 4 corresponding to the setting
you wish to change (e.g. 1 cup Espresso):
1 Espresso
Cof. 030
-/+
Wat. 040
>
The display flashes to show you which values you can
change in this setting. Press the
/ keys to make the
changes. On reaching the required value, press the key
to move to the next value to be set.
If you press the Cappuccino key for example, the display
shows:
1 Cappuccino
Cof. 030
-/+
Wat. 040
>
The coffee value will flash. After changing that value,
press the key to change the water value.
1 Cappuccino
Cof. 030
-/+
Wat. 040
>
Press the key again and the display shows:
1 Cappuccino
Milk frothed
-/+
060
>
Once this value is set to your requirements, follow the
same procedure with each beverage key in turn.
e.g. hot water:
Hot water
Imp. 090
-/+
After you have made all the required changes, turn the key
switch to position “I” to store all the new values.